A yearly service visit can mean two different things. One is a quick look over the equipment that you could do yourself with a flashlight and a notebook. The other is a technician opening the control valve, measuring flow, and checking the internal condition of the unit. Knowing which part you can handle and which part belongs to a professional keeps you from paying for a visit that only needed a glance, and from skipping the work that needed hands-on testing.
What you can check yourself
Start with the parts you can see and reach without tools. Walk around the unit and look at every fitting, connection, and the bypass valve for drips, damp spots on the floor, or white crust forming at joints. Check that the bypass handle is in the position you expect, so you know whether water is passing through the treatment or going around it. Look at the salt level in any brine tank and note whether it sits where the manufacturer marks it, and check the drain line for kinks or sagging that could slow discharge.
Next, take readings you can record. Read the pressure gauge on any filter housing and write the number down. Test the untreated and treated water with a home test strip and note the results. Photograph the display settings so you have a record of what the unit was set to. Keep these notes in one place, such as the folder with your warranty card and the install paperwork. Comparing this year's numbers to last year's is the most useful thing a homeowner can do, and it costs nothing.
What to leave to the technician
Some checks need tools, training, or access you should not improvise. Ask a technician to handle these:
Opening the control valve or inspecting internal seals and pistons beyond what is visible from outside. Measuring flow rate and pressure with calibrated gauges, and confirming that the regeneration cycle timing matches the way the system was set up. Checking the condition of the resin or media bed, which usually means sampling or opening the tank. Testing the electrical supply, the controller, and any wiring. Finding hidden leaks in the cabinet or in plumbing behind the unit with a pressure test. Collecting water samples for a certified lab report when you need one for a decision.
When a check should trigger a visit
Your own checks are only useful if you act on what they show. Call for a visit if a leak appears at a point you cannot tighten or dry out, if a pressure reading has dropped noticeably from your notes, if your test strip results have changed from the last time you tested, if the unit runs cycles at odd times or makes new sounds, or if the unit does not seem to regenerate when it should. Do not wait for the next scheduled visit to report any of these.
What to ask before the visit
Before anyone arrives, ask four questions. What will be checked, and will the technician write down the readings? Will you get a written summary at the end of the visit? Will any parts or repairs be quoted separately before any work starts? What does the visit fee cover, and what would be billed on top of it? The answers tell you whether the visit is a true inspection or a sales call with a checklist attached.
If you need to find someone to do the technician portion, the Top 6 Water Treatment Companies in Missouri page lists companies by ranking, and our ranking methodology explains how those rankings are built, so you can judge the list for yourself before you call anyone.