A rotten egg smell in household water is one of the easier odors to recognize, but it has more than one source. Before you call anyone or buy equipment, you need to find out which taps carry the smell, whether it comes from the water itself or from a drain, and how it behaves over time. Those answers decide what kind of help you need.
Check Which Taps Carry the Smell
Start with a simple comparison. Run the cold kitchen tap for about a minute, then smell a clean glass of water from it. Repeat with the hot kitchen tap, then with a bathroom sink on each side. Write down what you find in a few words, such as 'cold strong, hot strong' or 'hot only'.
The pattern tells you a lot. If the smell appears only at the hot tap, the water heater is the first suspect. A magnesium or aluminum anode rod inside the tank can react with sulfur in the water and produce the smell, and bacteria inside a tank can do the same. If the smell appears at both hot and cold taps throughout the house, the source is more likely upstream of the heater, in the well, the supply line, or the treatment equipment itself. If the smell shows up only after the house has sat empty for a while and fades after running the tap, the water is probably stagnant in the pipes or the tank.
Separate a Water Smell From a Drain Smell
Sewer gas and drain odors are a common mix-up. Sewer gas tends to rise from a drain and is strongest when you lean over the sink. Water odor comes from the glass and fades or changes when you let the tap run. To sort this out, fill a clean glass from the cold tap and smell it away from the sink. Then smell the drain itself. If the glass smells and the drain does not, the problem is in the water. If only the drain smells, the issue is a dry trap, a vent, or a drain line, and a water treatment company will not fix it.
Rule Out Other Odors Before You Decide
Sulfur is not the only earthy or unpleasant smell a water supply can have. Musty or earthy odors can come from organic material. A metallic taste or flat smell can point to other minerals or to a corroded pipe. Chlorine has its own pattern and is a different problem. Compare what you smell against the pattern you wrote down. If the smell does not match the sulfur description, a sulfur-focused fix will not solve it.
What to Ask Before You Book a Visit
When you contact a water treatment company about a sulfur smell, ask specific questions and compare the answers.
- Do you test for hydrogen sulfide, and do you measure at both hot and cold taps?
- What treatment method do you propose for sulfur, and why that one for my water and not another?
- Does the quote include inspecting or replacing the water heater anode rod, or flushing the tank?
- Will you retest the water after the install, and at which taps?
- Who handles the first service visit if the smell comes back?
A vague answer such as 'we will fix the smell' is not enough. A useful answer names the test, the treatment, and the retest step. If you want a framework for comparing companies on these points, our ranking methodology explains how we score them.
Get a Lab Sample Before You Commit
A smell test cannot tell you what is in the water. Ask a state-certified or accredited lab to test a sample. Ask them to include hydrogen sulfide and coliform bacteria, because a sulfur smell can come with bacteria, and only a lab sample can confirm either one. If anyone in your home has a health concern, talk with their doctor about the water. Keep the lab report with your service records so the next technician has the numbers to work from.
What to Do Next
Write down which taps smell, whether the odor is hot only, cold only, or both, and whether it fades after running the water. Separate any drain odor from the water odor. Then get a lab sample and two or three written quotes that name the test, the treatment, and the retest. With those notes in hand, you are deciding on a specific problem instead of guessing at one.