Before you compare quotes, decide which numbers you will stand behind. Sizing a softener, a filter, or a reverse osmosis unit depends on a few household facts. If the seller fills those facts in for you, you may end up with a unit that is too small for your home or bigger and more expensive than you need. Writing down your own figures first lets you check every quote against the same starting point.

Count how your household uses water

Start with the people who live in the house and how they use water day to day. Note how many people bathe, how often the laundry runs, whether anyone works from home, and whether you have a dishwasher, a second bathroom, or an outdoor tap that gets used. Ask each seller what number they used for household size and daily use. If the answer is a standard figure per person and not your actual routine, ask them to rerun the sizing with your numbers.

Also note peak use, not just the daily total. A unit can handle a full day's water and still fall short when the shower and the washing machine run at the same time. Ask the seller how the unit performs during peak draw, and whether the sizing accounts for it.

Get a hardness reading you can trust

For a softener, the hardness reading drives most of the sizing. Ask where the number came from. A reading taken from your own tap, with a clear record of who ran the test and when, is more useful than a figure quoted from a neighbor's house or a general regional average. If one seller uses a different hardness figure than another, the sizing difference may come from the number, not from the equipment. Put the figure on your list and ask every seller to use it.

For filters and reverse osmosis units, ask which contaminants the sizing is based on. A unit sized for one problem may not be the right size for another, so make sure your list names the reason you are buying.

Ask what changes later

Households grow, and water habits change. Ask each seller what happens if you add a person, a bathroom, or an appliance. Ask whether the unit can be upgraded, whether the sizing has room to grow, and what the seller would charge to resize it. A quote that works today but leaves no room for change may cost more in a few years than a slightly larger unit would have cost at the start.

Put your numbers on the quote

When you ask for a quote, give the seller your list of figures and ask them to write those figures on the quote itself. Include the household count, the hardness reading, the peak-use assumption, and the flow or capacity they recommended. Then compare the quotes side by side. If the numbers match, you can compare price and equipment fairly. If they do not match, ask why before you decide.

If you are weighing how companies were evaluated before you shortlist them, our ranking methodology explains how we score them. Your own sizing list is still the best tool for checking whether a particular quote fits your home.