A UV disinfection unit has two parts that wear in different ways. The lamp loses output as it ages, even when it still glows. The quartz sleeve is the clear tube that shields the lamp from the water, and it can collect a film of minerals or iron that blocks part of the light before the lamp fails. Both need routine attention, and neither announces itself clearly, so the job is to make the checks regular.
Find out what your unit tells you
Ask the installer or read the manual to learn whether the controller counts lamp hours, shows an alarm, or only has a light. Ask how many hours the lamp is rated for and whether the controller resets its count when you swap a lamp. Write the install date and the lamp's rated hours on a card taped inside a cabinet door or stored with the manual. If the unit has a viewport or sight glass, note what the lamp looks like when it is working normally so a change is easy to spot later.
Clean the sleeve on the schedule the maker gives
Shut off the power and the water supply as the manual directs, and let the unit depool before you open it. Never look directly at a lit lamp, and do not open the chamber while the lamp is energized. Remove the sleeve carefully, wipe it with a soft cloth, and use only the cleaner the manufacturer names. Some cleaners damage seals or leave residue that affects output. Dry the sleeve, seat it squarely with the O-rings in good condition, then restore water and power in the order the manual lists.
Things to ask before you agree to the service plan
Ask the installer how often the sleeve should be cleaned for your water and what signs in your water tell you to clean sooner. Ask whether the lamp replacement interval depends on hours, on calendar time, or on both. Ask who will record the cleaning and lamp swap so the log is kept and not left to memory. If the service visit is included in any agreement, confirm exactly which tasks it covers.
Keep a simple log
A one-page log is enough: the date of each sleeve cleaning, the lamp hours shown on the controller, any alarm or change in the lamp's glow, and the date of each lamp replacement. A log helps you spot a pattern, such as a sleeve that clouds up faster than expected, and gives a technician the history they need when you call.