A treatment unit can be installed correctly and still stop treating water. The most common reason is a bypass valve left in the bypass position, often after a service visit, a plumbing repair nearby, or a household member adjusting a handle to get the kitchen tap working. When that happens, the unit looks normal and may even make its usual sounds, but water reaches your taps without passing through the treatment media. You will not notice until the symptoms return.
Signs the water is going past the unit
Watch for the symptoms the unit was installed to fix. Staining that comes back on fixtures, a metallic or chemical taste that returns, cloudiness after the unit was clear, or a hardness problem that reappears can all mean water is bypassing treatment. Compare the treated kitchen tap with an outdoor hose bib or any tap upstream of the unit. If the upstream tap has the problem and the treated tap seems to have it too, the unit is probably not doing its job.
How to check the valve position
Find the bypass valve and read the printed labels or the position marks on the valve body. Handle orientation differs between brands, so look in the owner's manual for the service position and the bypass position before you touch anything. Do not force a handle that resists. If the valve is stuck, or you cannot tell which position is which, call the company that installed the unit and describe what you see. Note the handle position and take a photo before any change.
Other things to check
If the unit has a pressure gauge or an indicator window, check whether it is moving or showing the pressure it normally shows. A gauge that never changes can mean no water is passing through. Keep a short written note of when you first noticed the symptom, what you checked, and what the valve looked like. That note helps a technician find the cause faster, and it helps you know whether a repair restored treatment or only hid the symptom for a while.