A water softener is a timed machine. Its controller decides when to regenerate based on a clock and a set of programmed values. Many controllers keep those settings during a short outage, but some lose the clock time or revert to defaults if the power is off long enough. When that happens, the unit can keep running with no visible warning, and the first sign is often hard water showing up earlier than expected.
What a power cut can do
Depending on the controller, a power cut can leave the clock flashing, reset it to a default time, or keep the time but clear a setting. Some controllers have a backup battery that holds the time. Others do not. The controller may also be set to start a regeneration soon after it resets, which can put the cycle at an odd hour when the household is using water.
The signs you can check yourself
Watch for these signs after any outage, and also in the days that follow:
The display is flashing or shows a time that is clearly wrong. You hear the valve or the brine system running at an hour when it normally would not, such as midday when someone is showering. The unit seems to skip a regeneration you expected. Hard water returns sooner than usual, shown by soap that does not lather well, new spotting on glassware, or a faint change in taste. Those are the signs most people notice first.
What to do after an outage
Set the clock to the correct time. Then confirm the regeneration time you originally programmed, because a reset may have changed it. Check the salt level in the brine tank so you know the unit has what it needs for the next cycle. Confirm that the bypass valve is in the normal service position. If the display does not hold the time or the settings after a second outage, stop relying on it and call the company that installed it.
Keep a written copy of the settings
Write down the regeneration time, the cycle frequency, and any other values the installer programmed. Store that note with your other unit papers. If the controller resets, you can restore the settings without guessing, and you can confirm them quickly with the installer.
Questions to ask the installer
Before you choose a unit or a service company, ask these questions and get the answers in writing:
Does the controller have a backup battery that holds the clock and the settings? What does the controller do after a reset, and does it start a regeneration right away? Can the regeneration time be set so that a reset does not put it at an inconvenient hour? Who should I call if the display shows the wrong time after an outage, and is that service covered by the quote or a separate charge?
An unknown reset behavior is easy to miss and easy to ask about before you buy. If the installer cannot explain what the controller does after power returns, that gap is worth noting before you sign.