The resin in a softener is a bed of small beads that swap hardness minerals for sodium. Salt recharges the beads during regeneration. The bed does not announce when it is worn out. It usually shows up as hard water coming through, scale on fixtures, or a unit that regenerates but no longer softens well. Keeping the bed working depends on protecting it from the things that damage it and checking the signs early.
What can damage the resin
Many resins are sensitive to chlorine and other oxidants. Check the limits the manufacturer lists for your resin type, and if your supply carries significant chlorine, ask whether a carbon pre-treatment step is needed to protect the bed. Iron and manganese can also coat the beads and reduce their capacity. If your water carries either one, the softener usually needs a pre-treatment step designed for it, and the installer should confirm that during the design stage.
Sediment and fouling
Sediment that reaches the bed can clog it and cause uneven flow. A sediment filter ahead of the softener helps, and its cartridges need regular changing. Fouled resin may respond to a cleaning by a qualified service person, but a bed that stops responding to cleaning usually needs replacement.
Salt and the brine tank
Low salt or salt that has formed a crust, called bridging, can stop the brine from reaching the resin. The result is hardness leaking through even though the unit is running. Keep the salt level above the minimum mark, break up any bridge you find, and use the salt type the manufacturer specifies.
A monthly log that catches problems
Keep a simple log with the date of each check, salt level, any bridging, and the hardness reading from a test kit. A kit reading that starts to creep up between regenerations is an early sign that the bed is losing capacity or the brine is not reaching it. Note any scale on fixtures or any change in how the water feels or looks.
Who checks what
Name one person in the house to check the salt and the log each month. Name who calls the service person and who approves any cleaning or replacement. A bed that is checked on a schedule usually shows its trouble while the fix is still small.
When to call a service person
Call a qualified service person if hardness keeps coming through after the salt and brine are confirmed, if the unit fails to regenerate, or if you see signs of iron or other fouling. Ask the service person to explain what they found in the bed and what they recommend, and ask for that in writing.