Installation ends when the crew packs up, but the system is not proven until it has run through normal use. Commissioning is the startup period where you confirm the unit is working as installed and set up a record that protects you if something goes wrong later.
Before the installer leaves
Ask for the startup record in writing. It should list the date the system was started, the bypass position, the settings the installer entered, the pressure and flow they measured, and the name of the person to call. Ask them to walk you through where the bypass valve is and what position means treated water is flowing to the house. Photograph the unit, the valve positions, and any labels so you have a reference later.
The first 24 hours
Walk the lines and the joints every few hours and look for drips, damp spots, or loose fittings. Listen for unusual noise from the unit. Check the drain or discharge line to confirm water is leaving where the installer said it would. Do not change the programmed settings yourself. If something looks off, call the installer and let them adjust it.
The first week
- Run a few taps around the house and note the flow at each one, especially the taps you use most in the morning.
- Check the joints again at the end of each day for slow leaks that only show under sustained pressure.
- Keep a simple log with the date, the taps you tested, and anything that looked wrong.
- Confirm that the unit is still in service mode and has not moved to a bypass position on its own.
Retesting the water
If the install was chosen to fix a specific problem, schedule the retest for after the system has had time to settle, and ask the installer when they expect treated water to be ready to sample. Use a certified lab for the retest, and compare the results to the original test rather than to the unit's own display. If the retest shows the problem remains, give the installer the lab report and your log together.
What to keep
File the startup record, the warranty, the signed installation page, your photographs, and your log in one place. If anything fails later, the person who answers your call will ask for exactly these items, and having them ready shortens the wait.